Role of carbohydrate binding modules, CBM3A and CBM3B in stability and catalysis by a ß-1,4 endoglucanase, AtGH9C-CBM3A-CBM3B from Acetivibrio thermocellus ATCC 27405.

A recombinant ß-1,4 endoglucanase, AtGH9C-CBM3A-CBM3B from Acetivibrio thermocellus ATCC27405 was explored for biochemical properties and the role of its associated CBMs in catalysis. The gene expressing full-length multi-modular ß-1,4-endoglucanase (AtGH9C-CBM3A-CBM3B) and its truncated derivatives (AtGH9C-CBM3A, AtGH9C, CBM3A and CBM3B) were independently cloned and expressed in Escherichia coli BL21(DE3) cells and purified. AtGH9C-CBM3A-CBM3B showed maximal activity at 55 °C and pH 7.5. AtGH9C-CBM3A-CBM3B exhibited highest activity against carboxy methyl cellulose (58.8 U/mg) followed by lichenan (44.5 U/mg), ß-glucan (36.2 U/mg) and hydroxy ethyl cellulose (17.9 U/mg). Catalytic module, AtGH9C showed insignificant activity against the substrates, signifying the essential requirement of CBMs in catalysis. AtGH9C-CBM3A-CBM3B displayed stability in pH range, 6.0-9.0 and thermostability up to 60 °C for 90 min with unfolding transition midpoint (Tm) of 65 °C. The generation of cellotetraose and other higher oligosaccharides by AtGH9C-CBM3A-CBM3B confirmed it as an endo-ß-1,4-glucanase. AtGH9C activity was partially recovered by the addition of equimolar concentration of CBM3A, CBM3B or CBM3A + CBM3B by 47 %, 13 % or 50 %, respectively. Moreover, the associated CBMs imparted thermostability to the catalytic module, AtGH9C. These results showed that the physical association of AtGH9C with its associated CBMs and the cross-talk between CBMs are necessary for AtGH9C-CBM3A-CBM3B in effective cellulose catalysis.

AMPK-driven Macrophage Responses Are Autophagy Dependent in Experimental Bronchopulmonary Dysplasia.

The pathogenesis of bronchopulmonary dysplasia (BPD) remains incompletely understood. Recent studies suggest insufficient AMP-activated protein kinase (AMPK) activation as a potential cause of impaired autophagy in rodent and nonhuman primate models of BPD. Impaired autophagy is associated with enhanced inflammatory signaling in alveolar macrophages (AMs) and increased severity of murine BPD induced by neonatal hyperoxia exposure. The goal of this study was to determine the role of autophagy and AMPK activation in macrophage responses in murine BPD. C57BL/6J mice were exposed to neonatal hyperoxia starting on postnatal day (P)1 and treated with the AMPK activator 5-aminoimidazole-4-carboxamide ribonucleotide (AICAR) between P3 and P6. Mice were euthanized on P7, and markers of AMPK activation and autophagy were assessed by immunoblotting. Alveolarization was assessed using radial alveolar counts, mean linear intercept measurements, and quantification of alveolar septal myofibroblasts. Relative mRNA expression of M1-like and M2-like genes was assessed in AMs isolated from BAL fluid from wild-type, LysMCre--Becn1fl/fl, and LysMCre+-Becn1fl/fl mice after neonatal hyperoxia exposure. AICAR treatment resulted in AMPK activation and induction of autophagic activity in whole-lung and BAL cell lysates and attenuated hyperoxia-induced alveolar simplification in neonatal lungs. AICAR-treated control but not Beclin1-deficient AMs demonstrated significantly decreased expression of M1-like markers and significantly increased expression of M2-like markers. In conclusion, pharmacologic activation of AMPK by AICAR resulted in induction of autophagy and played a protective role, at least in part, through attenuation of proinflammatory signaling in AMs via autophagy-dependent mechanisms in a murine model of BPD.

Structural insights of a putative ß-1,4-xylosidase (PsGH43F) of glycoside hydrolase family 43 from Pseudopedobacter saltans.

Structural and conformational insights of a putative ß-1,4-xylosidase (PsGH43F) of glycoside hydrolase family 43 from Pseudopedobacter saltans were investigated by computational and Circular Dichroism (CD) analyses. PsGH43F was cloned and expressed in E. coli BL21 (DE3) cells and the purified enzyme gave the size ~50 kDa on SDS-PAGE analysis. Multiple Sequence Alignment of PsGH43F sequence followed by superposition of modeled structure with homologous structures displayed the presence of three conserved catalytic amino acid residues, Asp33, Asp149 and Glu212. The secondary structure analysis by CD showed 2.72 % α-helix and 36.06 % ß-strands. The homology modeled structure of PsGH43F displayed a 5-bladed ß-propeller fold for catalytic module at N-terminal and a ß-sandwich structure for CBM6 at the C-terminal. Ramachandran plot displayed 99.5 % of residues in the allowed regions. MD simulation of PsGH43F revealed the compactness and stability of the structure. Molecular docking studies of PsGH43F with xylo-oligosaccharides revealed its maximum binding affinity for xylobiose. MD simulation of PsGH43F-xylobiose complex confirmed the increased structural and conformational stability in presence of substrate. The Hydrodynamic diameter analysis of PsGH43F by DLS was in the range, 0.25-0.28 µm.

A trimodular family 16 glycoside hydrolase from the cellulosome of Ruminococcus flavefaciens displays highly specific licheninase (EC 3.2.1.73) activity.

Cellulosomes are highly complex cell-bound multi-enzymatic nanomachines used by anaerobes to break down plant carbohydrates. The genome sequence of Ruminococcus flavefaciens revealed a remarkably diverse cellulosome composed of more than 200 cellulosomal enzymes. Here we provide a detailed biochemical characterization of a highly elaborate R. flavefaciens cellulosomal enzyme containing an N-terminal dockerin module, which anchors the enzyme into the multi-enzyme complex through binding of cohesins located in non-catalytic cell-bound scaffoldins, and three tandemly repeated family 16 glycoside hydrolase (GH16) catalytic domains. The DNA sequence encoding the three homologous catalytic domains was cloned and hyper-expressed in Escherichia coli BL21 (DE3) cells. SDS-PAGE analysis of purified His6 tag containing RfGH16_21 showed a single soluble protein of molecular size ~89 kDa, which was in agreement with the theoretical size, 89.3 kDa. The enzyme RfGH16_21 exhibited activity over a wide pH range (pH 5.0-8.0) and a broad temperature range (50-70 °C), displaying maximum activity at an optimum pH of 7.0 and optimum temperature of 55 °C. Substrate specificity analysis of RfGH16_21 revealed maximum activity against barley ß-d-glucan (257 U mg-1) followed by lichenan (247 U mg-1), but did not show significant activity towards other tested polysaccharides, suggesting that it is specifically a ß-1,3-1,4-endoglucanase. TLC analysis revealed that RfGH16_21 hydrolyses barley ß-d-glucan to cellotriose, cellotetraose and a higher degree of polymerization of gluco-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a fairly high, active and thermostable bacterial endo-glucanase which may find considerable biotechnological potentials.

Two-Step Saccharification of the Xylan Portion of Sugarcane Waste by Recombinant Xylanolytic Enzymes for Enhanced Xylose Production.

Sugarcane bagasse (SB) and sugarcane trash (SCT) containing 30% hemicellulose content are the waste from the sugarcane industry. Hemicellulose being heterogeneous, more complex, and less abundant than cellulose remains less explored. The optimized conditions for the pretreatment of SB and SCT for maximizing the delignification are soaking in aqueous ammonia (SAA), 18.5 wt %, followed by heating at 70 °C for 14 h. The optimization of hydrolysis of SAA pretreated (ptd) SB and SCT by the Box-Behnken design in the first step of saccharification by xylanase (CtXyn11A) and α-l-arabinofuranosidase (PsGH43_12) resulted in the total reducing sugar (TRS) yield of xylooligosaccharides (TRS(XOS)) of 93.2 mg/g ptd SB and 85.1 mg/g ptd SCT, respectively. The second step of saccharification by xylosidase (BoGH43) gave the TRS yield of 164.7 mg/g ptd SB and 147.2 mg/g ptd SCT. The high-performance liquid chromatography analysis of hydrolysate obtained after the second step of saccharification showed 69.6% xylan-to-xylose conversion for SB and 64.1% for SCT. This study demonstrated the optimization of the pretreatment method and of the enzymatic saccharification by recombinant xylanolytic enzymes, resulting in the efficient saccharification of ptd hemicellulose to TRS by giving 73.5% conversion for SB and 71.1% for SCT. These optimized conditions for the pretreatment and saccharification of sugarcane waste can also be used at a large scale.

Extraction and characterization of xylan from sugarcane tops as a potential commercial substrate.

Xylan is the major hemicellulose present in sugarcane stem secondary cell walls. Xylan is composed of xylose backbone with a high degree of substitutions, which affects its properties. In the present study, the xylan from sugarcane tops (SCT) was extracted and characterized. Compositional analysis of xylan extracted from SCT (SCTx) displayed the presence of 74% of d-xylose residues, 16% of d-glucuronic acid residues and 10% of l-arabinose. High performance size exclusion chromatographic analysis of SCTx displayed a single peak corresponding to a molecular mass of ∼57 kDa. The Fourier transform infrared spectroscopic analysis of SCTx displayed the peaks corresponding to those obtained from commercial xylan. FESEM analysis of SCTx showed the granular and porous surface structure. Differential thermogravimetric analysis (DTG) of SCTx displayed two thermal degradation temperatures (Td) of 228°C, due to breakdown of the side chains of glucuronic acid and arabinose and 275°C, due to breakdown of xylan back bone. The presence of arabinose and glucuronic acid as a side chains was confirmed by the DTG and thermogravimetric analysis. The CHNS analysis of SCTx showed the presence of only carbon and hydrogen supporting its purity. The recombinant xylanase (CtXyn11A) from Clostridium thermocellum displayed a specific activity of 1394 ± 51 U/mg with SCTx, which was higher than those with commercial xylans. The thin layer chromatography and electrospray ionization mass spectroscopy analyses of CtXyn11A hydrolysed SCTx contained a series of linear xylo-oligosaccharides ranging from degree of polymerization 2-6 and no substituted xylo-oligosaccharides because of the endolytic activity of enzyme. The extracted xylan from SCT can be used as an alternative commercial substrate and for oligo-saccharide production.

Extraction, characterization of xylan from Azadirachta indica (neem) sawdust and production of antiproliferative xylooligosaccharides.

Xylan extracted from neem sawdust gave 22.5%, (w/w) yield. The extracted xylan was composed of xylose and glucuronic acid at a molar ratio of 8:1 and with a molecular mass, ~66 kDa. FTIR and NMR analyses indicated a backbone of xylan substituted with 4-O-methyl glucuronic acid at the O-2 position. FESEM analysis showed a highly porous and granular surface structure of xylan. A thermogravimetric study of xylan showed thermal denaturation at 271 °C. The hydrolysis of xylan by recombinant endo-ß-1,4-xylanase produced a mixture of xylooligosaccharides ranging from degree of polymerization 2-7. Xylooligosaccharides inhibited cell growth of human colorectal cancer (HT-29) cells but did not affect the mouse fibroblast cells confirming its biocompatibility. Western blotting, DNA laddering and flow cytometric analysis displayed inhibition of HT-29 cells by xylooligosaccharides. FLICA staining and mitochondrial membrane potential analyses confirmed the activation of the intrinsic pathway of apoptosis. The study amply indicated that the xylooligosaccharides produced from neem xylan could be potentially used as an antiproliferative agent.

Structure and dynamics analysis of a family 43 glycoside hydrolase α-L-arabinofuranosidase (PsGH43_12) from Pseudopedobacter saltans by computational modeling and small-angle X-ray scattering.

The structure and molecular dynamics of α-L-arabinofuranosidase (PsGH43_12) of family 43 glycoside hydrolase, subfamily 12 from Pseudopedobacter saltans were studied. The modeled PsGH43_12 structure displayed 5-bladed ß-propeller fold at N-terminal and ß-sandwich fold at C terminal. Ramachandran plot showed 95.7% residues in favored and 3.3% in the generously allowed region and only 1% residues in the disallowed region. The secondary structure analysis of PsGH43_12 by circular dichroism revealed 2.7% α-helices, 30.33% ß-strands and 66.97% random coils. Protein melting study of PsGH43_12 showed complete unfolding at 65°C and did not require any metal ion for its stability. Molecular docking analysis confirmed the involvement of active site residues Asp71, Asp180 and Glu247 in the catalysis, which was also confirmed by the site-directed mutagenesis of these residues. SAXS analysis displayed that PsGH43_12 is monomeric and a fully folded state in solution form. Guinier analysis gave the radius of gyration (Rg) 2.8 ± 0.09 nm. The maximum dimension and Rg of PsGH43_12 estimated from P(R) plot were 9.7 nm and 2.81 nm, respectively. The ab initio derived dummy model of PsGH43_12 displayed a bell-like shape. The ab initio derived dummy model superposed well with its comparative modeled structure except the N-terminal His6-tag region.

Molecular Characterization, Regioselective and Synergistic Action of First Recombinant Type III α-L-arabinofuranosidase of Family 43 Glycoside Hydrolase (PsGH43_12) from Pseudopedobacter saltans.

α-L-Arabinofuranosidase (PsGH43_12) of family 43 glycoside hydrolase and subfamily 12 from Pseudopedobacter saltans was cloned, over-expressed and biochemically characterized. PsGH43_12 displayed molecular mass, ~ 65 kDa. It exhibited activity in pH (5-9) and temperature range (35-55 °C) with maxima at pH 6.5 and 50 °C. PsGH43_12 gave 88.7 U/mg specific activity against rye arabinoxylan and 78.9 U/mg against wheat arabinoxylan. PsGH43_12 displayed Km and Vmax, 3.02 mg/ml and 103 µmole/min/mg, respectively, against rye arabinoxylan and 2.17 mM and 100.7 µmole/min/mg, respectively, against pNP-α-L-arabinofuranoside. 10 mM Mg2+ or Ca2+ ions enhanced PsGH43_12 activity by 54% or 33%, respectively. PsGH43_12 hydrolyzed rye arabinoxylan and released only L-arabinosyl moiety as main product, confirming its specificity towards α-L-arabinofuranoside. The regioselective analysis by NMR showed that PsGH43_12 belongs to type III α-L-arabinofuranoside. The synergistic behavior of PsGH43_12 in saccharification of mild alkali pretreated finger miller stalk (FMS) along with xylanase (CtXyn11A) from Clostridium thermocellum and xylosidase (BoGH43) from Bacteroides ovatus gave twofold higher total reducing sugar (TRS) yield. TLC analysis of pretreated FMS hydrolysed by CtXyn11A and BoGH43 showed xylooligosaccharides and xylose. Addition of PsGH43_12 to above combination gave mostly xylose and arabinose confirming their synergistic behavior and displaying their applicability in hydrolysis of hemicellulosic biomass.

Acacia Xylan as a Substitute for Commercially Available Xylan and Its Application in the Production of Xylooligosaccharides.

Over the past two decades, birchwood and beechwood xylans have been used as a popular substrate for the characterization of xylanases. Recently, major companies have discontinued their commercial production. Therefore, there is a need to find an alternative to these substrates. Xylan extraction from Acacia sawdust resulted in 23.5% (w/w) yield. The extracted xylan is composed of xylose and glucuronic acid residues in a molar ratio of 6:1 with a molecular mass of ∼70 kDa. The specific optical rotation analysis of extracted xylan displayed that it is composed of the d-form of xylose and glucuronic acid monomeric sugars. The nuclear magnetic resonance analysis of extracted xylan revealed that the xylan backbone is substituted with 4-O-methyl glucuronic acid at the O2 position. Fourier transform infrared analysis confirmed the absence of lignin contamination in the extracted xylan. Xylanase from Clostridium thermocellum displayed the enzyme activity of 1761 U/mg against extracted xylan, and the corresponding activity against beechwood xylan was 1556 U/mg, which confirmed that the extracted xylan could be used as an alternative substrate for the characterization of xylanases.

Molecular Cloning, Expression and Biochemical Characterization of a Family 5 Glycoside Hydrolase First Endo-Mannanase (RfGH5_7) from Ruminococcus flavefaciens FD-1 v3.

The cellulosomal enzyme, RfGH51/2, of Ruminococcus flavefaciens contains an N-terminal module, a family 5 glycoside hydrolase GH5_4 with a putative endoglucanase activity, while C-terminal domain is a putative endo-mannanase (GH5_7). The two putative catalytic modules are separated by family 80 carbohydrate binding module (CBM80) having wide ligand specificity. The putative endo-mannanase module, GH5_7 (RfGH5_7), was cloned, expressed in Escherichia coli BL-21(DE3) cells and purified. SDS-PAGE analysis of purified RfGH5_7 showed molecular size ~ 35 kDa. Substrate specificity analysis of RfGH5_7 showed maximum activity against locust bean galactomannan (298.5 U/mg) followed by konjac glucomannan (256.2 U/mg) and carob galactomannan (177.2 U/mg). RfGH5_7 showed maximum activity at optimum pH 6.0 and temperature 60 °C. RfGH5_7 displayed stability in between pH 6.0 and 9.0 and thermostability till 50 °C. 10 mM Ca2+ ions increased the enzyme activity by 33%. The melting temperature of RfGH5_7 was 84 °C that was not affected by Ca2+ ions or chelating agents. RfGH5_7 showed, Vmax, 389 U/mg and Km, 0.92 mg/mL for locust bean galactomannan. TLC analysis revealed that RfGH5_7 hydrolysed locust bean galactomannan predominantly to mannose, mannobiose, mannotriose and higher degree of polymerization of manno-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a highly active and thermostable endo-mannanase with considerable biotechnological potential.

Structure and biochemical characterization of glucose tolerant ß-1,4 glucosidase (HtBgl) of family 1 glycoside hydrolase from Hungateiclostridium thermocellum.

ß-1,4-glucosidase (HtBgl) of family 1 glycoside hydrolase from Hungateiclostridium thermocellum was cloned in pET28a(+) vector, expressed, biochemically and structurally characterized. HtBgl displayed 67 U/mg activity against 4-nitrophenyl-ß-d-glucopyranoside, followed by 180 U/mg against cellobiose and 42 U/mg activity against 4-nitrophenyl-ß-d-galactopyranoside. HtBgl displayed an optimum temperature of 65 °C and an optimum pH of 6.0. HtBgl was stable in the pH range, 4.0-8.0 and displayed the thermostability up to 60 °C for 1 h. HtBgl displayed the glucose tolerance up to 750 mM and retained ~70% activity after 20 h. HtBgl crystal structure submitted (PDB id 5OGZ) by others exhibited a classical Triosephosphate Isomerase, (ß/α)8-barrel fold. Protein melting analysis of HtBgl exhibited a single peak at 78 °C and the addition of 5 mM Mg2+ shifted the peak to 82 °C. Molecular dynamics studies showed that the amino acid residues from 351 to 375 exhibit the flexibility due to the presence of the catalytic acid residue. The structure comparison of HtBgl with homologous proteins and its docking analysis with probable ligands revealed that the residues, E166 and E355 are involved in the catalysis. The SAXS analysis of HtBgl showed that the protein is monomeric and present in a fully folded state. The radius of gyration (Rg) found was 2.15-2.26 nm. The bell-shaped curve obtained by Kratky plot analysis displayed the globular shape and fully folded state with flexibility in the N-terminal region. The HtBgl crystal structure superposed well with the SAXS derived dummy atom model.

Enzymatic hydrolysis of hemicellulose from pretreated Finger millet (Eleusine coracana) straw by recombinant endo-1,4-ß-xylanase and exo-1,4-ß-xylosidase.

This study focuses on enzymatic saccharification of hemicellulose part of the pretreated Finger millet straw (FMS) for production of xylose. The variation in the carbohydrate composition of FMS was analysed when subjected to different pretreatments. The recombinant endo-1,4-ß-xylanase (CtXyn11A) was most active on the FMS pretreated with 1% (w/v) NaOH combined with oven heating at 120 °C for 20 min, resulting in a total reducing sugar yield (TRS) of 32 mg/g pretreated biomass. The pretreatment aided in concentrating the holocellulose content from 69.3% of raw powdered FMS to 76.4%. The post-treatment solid biomass yield was 0.36 g/g raw biomass. The two-step optimization of hemicellulose saccharification from the above pretreated FMS with i) endo-1,4-ß-xylanase (CtXyn11A) at 55 °C and ii) exo-1,4-ß-xylosidase (BoGH43A) at 37 °C, both at pH 7.5 by Box-Behnken design yielded the TRS of 70 mg/g pretreated biomass. The percentage conversion of xylan to xylose by CtXyn11A and BoGH43A was 24.7%.